9' x 8' Hot Tub Cover for Master Spas (108" x 94")

MSCOVER9-8 - 9' x 8' Hot Tub Cover for Master Spas (108" x 94")

Master Spa Hot Tub Cover

Cover Size: 9' x 8' (94" x 108")

This is a one piece bi-fold cover.

Folds into 2 x 4.5 foot wide hinged halves.

Standard Features:

2.0 lb. Density Foam
5" to 3" Taper - R Value = 20
5 mil. Vapor Barrier
1 x Deluxe Full Length Steam Stopper
2 x Commercial Grade Rubber Handles
Lighter & More Durable WeatherShield Material
Four Keyed Locks

Covers normally take 6-8 weeks for delivery. All covers are shipped via freight mostly with FedEx , you need to sign for delivery. Please inspect the cover for any damages, if the cover is damaged please refuse the delivery. If the cover packaging is damaged but the cover is not, please note this on all delivery receipts before signing.

This Product Does Not Ship International

Please note that all hot tub and swim spa covers are non-returnable due to the custom nature of these products. We strongly advise customers to carefully inspect their cover upon delivery.

Important: Inspect for damage!

• Upon receiving your cover, thoroughly inspect it for any visible damage before signing for the delivery.
• If you notice any damage to the packaging or product, do not accept the delivery. Refuse the shipment and contact us immediately.
• If the cover is accepted and signed for and the cover is damaged after opening, contact us immediately.

We are committed to providing high-quality covers and want to ensure your satisfaction. If you have any concerns about your order, please contact our customer service team for assistance.

MSPO does not ship hot tub & swim spa covers internationally. Hot tub & swim spa covers ONLY ship within the Contiguous U.S.

At Master Spa Parts Online, we stand behind the quality and performance of every spa cover we offer. Our Cover Warranty Policy protects you against manufacturing defects in materials and workmanship for up to 36 months from the date of installation (with valid documentation).

Warranty Overview

This limited warranty applies only to hot tub and spa covers provided by Master Spa Parts Online and is subject to the additions, exceptions, exclusions, and limitations detailed below.

• Coverage begins on the date of installation with proper documentation.
• Warranty is limited to repair or replacement at Master Spa Parts Online’s discretion.
• This warranty is non-transferable and applies only to the original purchaser.

What the Cover Warranty Covers

Defects in Materials & Workmanship

If your spa cover fails due to a verified defect in materials or workmanship within the warranty period, Master Spa Parts Online will, at our discretion, repair or replace the defective component(s) and cover reasonable associated expenses.

Foam Core Coverage

• First-Year Foam Core Coverage: If a foam core fails due to defects in materials or workmanship within the first year from the date of manufacture, Master Spa Parts Online will replace the individual foam core panel at no charge (field labor excluded).
• Foam core warranty is void if any holes, punctures, or penetrations are found in the outer covering or inner seal.

WeatherShield™ & Vinyl (Skins) – 3 Year Coverage

WeatherShield™ and vinyl (skins) are covered for 3 years against deteriorating, dissolving, or breaking down. For approved claims, Master Spa Parts Online will supply a replacement skin at no charge, including freight, but excluding any field labor expense.

What the Hot Tub Cover Warranty Does Not Cover

Improper Use, Abuse, and Accidental Damage

This cover warranty does not cover damage caused by:

• Animals, fire, vandalism, or acts of God.
• Excessive chemicals, chemical misuse, or poor water chemistry.
• Improper installation, strain, or abuse of the cover.
• Using the skirt as a handle, dragging the cover across the ground, or improper lifting methods.
• Walking, standing, sitting, or leaning on the cover, resulting in foam breakage or skin tearing.
• Excessive weight from rain, water, snow, ice, or debris.

Normal Wear & Tear

• Ordinary wear and tear of materials and seams.
• De-lamination and seam splitting due to improper handling.
• Grommets and buckles, which are considered normal wear parts.
• Fading of outer skin material and thread due to exposure to chemicals, sunlight, and weather is not considered a defect and will naturally occur over time.

Water Pooling

Water pooling on top of the spa cover is not considered a warranty-related issue. Pooling water is typically due to improper installation, lack of support, excess weight, or neglect. Any damage resulting from water pooling is not covered under this warranty policy.

Improper Storage & Handling

• Warranty is void if scuffing, chafing, or wear holes appear due to the cover being dragged, stored, or leaned against sharp or abrasive objects.
• Any damage caused by pulling or handling the cover by the straps or skirt (e.g., torn skirt, torn straps, heat bag tear) is not covered.

Environmental Limitations

The insulating spa cover warranty is void if:

• Excessive use of chemicals or chemical damage occurs on the cover material.
• The hot tub or spa is located within 15 feet of a window, vinyl fence, or wall taller than 10 feet, due to potential heat reflection damage.

Alterations, Unauthorized Repairs & Label Requirements

• The cover warranty is void if the cover has been altered, misused, or abused, or if any repairs are attempted by anyone other than an authorized Master Spa Parts Online representative, unless express written approval is given.
• Please note: if the cover tag/label is torn off, cut off, or missing, the warranty is completely void. A clear photo of this label is required for any warranty claim to be considered.

Limitation of Liability

Master Spa Parts Online shall not be liable for any incidental or consequential damages to any hot tub, spa, surrounding surfaces, or property arising from the use or inability to use the spa cover.

This warranty provides specific legal rights. You may also have other rights which vary by state or region.

How to File a Cover Warranty Claim

To qualify for warranty coverage and start the claim process, please contact our customer service team and provide the following four (4) required items:

1. Proof of purchase such as the receipt or invoice.
2. Photo of the work order (WO) tag.
   
3. Photo clearly showing the defective material or workmanship.

• • Waterlogging - Unzip skip and take pictures of the foam core(s).
  • Seams - Close-up pictures of the stiching.
  • Damage - Pictures where the cover is torn.

1. Photo of the complete insulating cover placed on top of the spa, including the surrounding area and the underside of the cover.

Once all required documentation is submitted, our team will review your claim and determine eligibility based on the terms of this Cover Warranty Policy.