MAINTENANCE REMINDER MESSAGES

MAINTENANCE REMINDER MESSAGES

 Message

 Meaning

Check the PH

May appear on a regular schedule, i.e. every 7 days. Check the pH with a test kit and adjust pH with the appropriate chemicals.

Check the Sanitizer

May appear on a regular schedule, i.e. every 7 days. Check sanitizer level and other water chemistry with a test kit and adjust with the appropriate chemicals.

Clean the Filter

May appear on a regular schedule, i.e. every 30 days.

Test the GFCI

May appear on a regular schedule, i.e. every 30 days. The GFCI or RCD is an important safety device and must be tested on a regular basis to verify its reliability. Every user should be trained to safely test and reset the GFCI or RCD associated with the swim spa installation. A GFCI or RCD will have a TEST button on it that allows a user to verify the proper function.

Change the Water

May appear on a regular schedule, i.e. every 180 days. Change the water in the swim spa on a regular basis to maintain proper chemical balance and sanitary conditions.

Clean the Cover

May appear on a regular schedule, i.e. every 30 days. Vinyl/Fabric covers should be cleaned and conditioned for maximum life.

Treat the Wood

May appear on a regular schedule, i.e. every 180 days. Wood skirting and furniture should be cleaned and conditioned per the manufacturer’s instructions for maximum life.

Change the Filter

May appear on a regular schedule, i.e. every 365 days. Filters should be replaced periodically to maintain proper swim spa function and sanitary conditions. EcoPur® elements should be replaced every 180 days. Refer to Cleaning Your Filter Elements section in Routine Maintenance.

Change the UV

May appear on a regular schedule, i.e. every 18 months. Change the UV as instructed in the Mast3rPur section. This is a general message and may not apply if swim spa is not equipped with UV.

Check Ozone

May appear on a regular schedule, i.e. every 365 days. Check the ozone system as instructed in the Regular Maintenance Procedures.